Description
Battery For Husqvarna-Cb7s-Bs-Crank1
Description:
Model: CB7S-BS
Dimension:-
113mm×70mm×105mm
Capacity: 12VLT
Amperes: 6.Ah(10HR)
Weight: 2.100 KG
CCA: 160
Brand Application Chart:
(1) YAMAHA R1
(2)YAMAHA R6
(3) HONDA CBR 1000RR
(4)HUSQVARNA
Installation And Maintenance
1. Always Connect The Positive Terminal Firstly.
Do Not Reverse Polarity Otherwise The Electrical Equipment Of Motorcycle Will
Damage.
Caution- * Can’t Be Activated Due To The Different Performance Of Different Vehicle.
Start The Engine For More Times Or Step On Gas Which Can More Easily To Activate.
* Manual Activation Is Recommend To Achieve Exact Date Recorded.
2. Do Not Over Discharging The Battery, Charging The Battery Timely After Discharging.
3. Dismount Or Disconnect The Negative Terminal Of Battery If The Motorcycle Hasn’t Been
In Service For Long Term.
4. Do Not Check The Battery Has Power Or Not By Short-Circuit The Terminal
5. Regularly Check The Terminal Connection And The Surface Of Terminal Is Clean Or Not To
Ensure Well Connection.
6. Storage The Battery Where Is 5~25℃, Dry, Ventilated And No Direct Sunshine. Keep
The Battery At Least 2m Away From The Heat Source. Regularly Check And Maintain The
Battery
Motorcycle Battery Storage &Maintenance Instruction
In Order To Maintain The Validity Of The Warranty And Ensure The Best Performance Of The
Battery, Please Read This Article Carefully!
This Note Covers Products: Factory Activated Motorcycle Batteries (Smf),
1. First In .First Out
The Principle Of Sales And Storage Must Be Strictly Followed: Batteries Purchased And Stored Earlier And
Sell Them First.
2. Before Selling Or Installing Battery, Check The Battey Voltage
1.1 Before Battery Send To Your Dealer Or Selling: Please Be Sure To Check The Battery Voltage. Store Battery
In Temperature Exceeding 35 ° C. Check The Battery Voltage And Charge The Battery According To The
Following Charging Instructions:
If The Battery Voltage Exceeds 12.8v, No Need To Charge, Send Or Sell It Directly To The Dealer Or Install
Into Motorcycle.
If The Battery Voltage Is Between 12.6-12.8v Constant Voltage Value 14.40 ~ 15.0v, Then Charging Current
In 0.1c (A)For 4-6 Hours
If The Battery Voltage Is Less Than 12.6v Constant Voltage Value 14.40 ~ 15.0v, Then Charging Current In
0.1c (A) For 8-10 Hours
Note: Pay Attention To The Temperature Of Battery During The Charging, When You Touch The Surface Of
The Battery With Your Hands, If Feel Hot Then Need To Stop Charging, And Continue The Charging
Procedure After It Cool Down.
1.2 Before Installing The Battery On The Motorcycle: Please Inform All Your Dealers And Sales Stores To Check
The Battery Voltage And Follow Procedure 2.1 To Recharge Battery.
1.3 In Case Battery Has Stored For 6-12 Months, Then Battery Should Be Discharged In 0.1c (A) Current For 2
Hours, And Then Chargewithconstant Voltage Value 14.40 ~ 15.0v, In 0.1c (A) For 10 ~ 12 Hours。
1.4 During The Charging Process, Battery Voltage Will Exceed 13.5v And Voltage Will Automatically Drop After
Disconnection, This Is Normal. Please Re-Check The Battery Voltage After 4 Hours Disconnecting. The
Normal Battery Voltage Should Stay Between 12.95-13.2v And That The Is Fully Charged.
1.5 Caution ;
1.6 When Battery Is Charging, Please Keep The Battery Away From Flammable And Explosive Materials.
1.7 It Must Be Confirmed That The Power Supply Conditions Meet The Requirements Of The Charging
Equipment, Current Overload Should Not Occur.
1.8 The Operator Should Check The Battery Voltage And Current Changes Constantly When Battery Is Charging,
If The Charging Current Does Not Decrease During The Time, And It Is Increasing, The Surface Temperature
Of The Battery Will Be Increase. Test Temperature Of Battery With Hands, Stop Charging If It Is Hot.Pay
More Attention When The Ambient Temperature Is High.
1.9 Charge A Single Battery Or Multiple Batteries In Series. Pay Attention To The Reliable Connection Of The
Terminal And Cable To Avoid Overheating Caused By Poor Connections
1.10 For Battery Charging, Connect Correctly The Positive Terminal Of The Charger To The Positive Terminal Of
The Battery, And The Negative Terminal Of The Charger To The Negative Terminal Of The Battery To Avoid
Reverse Charging。
2. Suggestion.
2.1 Storage Environment: The Battery Will Have Self-Discharge Reaction During Storage. Self-Discharge Is
Related To The Environment And Temperature.Please Pay Attention To The Following Points:
1) Please Place The Battery In A Well-Ventilated, Dry And Clean Place. Do Not Soak It With Water And
Other Substances
2) Battery Storage Temperature Can Be Around 5 ℃ ~ 40 ℃, The Best Storage Temperature Is Between
20 ℃ ~ 25 ℃。
Safe Use Precautions
1. Do Not Place The Battery Against The Side Or Upside Down To Prevent Acid Leakage.
2. The Hydrogen Will Be Generated During The Working And Discharging Of Battery Which Will
Cause Explosion If There Were Fire. Pay Attention For The Following:
3. Maintain And Use The Battery Where Is Ventilate.
4. No Sparks And Flame When The Battery Is In Maintenance.
5. If The Battery Is Charging Outside The Vehicle Which Can’t Be Installed Immediately After Finish
Charging Until Laying At Lease 10min To Release The Hydrogen Generated Inside The Battery.
6. After Riding, The Battery Can’t Be Dismounted Immediately Until Laying For At Least 10 Mins.
7. During Charging, The Ambient Temperature Should Not Be Over 45℃, Otherwise Cooling By
Water Or By Reducing The Charging Current And Charging Volts.
8. Do Not Places The Metal Tool Or Conducting Matter Nearby The Terminal In Case Short-Circuit
The Terminal.
9. Do Not Knock The Terminal By Hammer During The Battery Installation.
10.Be Safe During Carrying To Prevent Hitting.
Why Do Customers Love To Purchase From Us?
👉 Go The Extra Mile To Serve Our Customers. We Provide Add More Value Than They Anticipate.
👉 We Provide The Best Solutions Since We Are Aware Of Our Customers’ Needs.
👉 Customer Satisfaction Is Our Main Priority, As Thousands Of Our Clients Attest To.
👉 At The Htrz Modz, We Never Compromise On Quality. We Provide The Highest Quality Products At Unbeatable Pricing.
👉 The Htrz Modz Is Dedicated To Providing High-Quality And World-Class Products And Services In Two Wheeler Industry.